|
CP Centrifugal Pump Range General Product Description
PERFORMANCE RANGE
Flow rate up to 160 l/min (9.6 m³/hr)
Dynamic head up to 58m
PUMP INSTALLATION AND APPLICATIONS
These pumps are suitable for handling clean water and liquids which are not chemically aggressive
to the pump components.
RELIABLE AND EASY TO USE, THESE PUMPS ARE WIDELY USED IN DOMESTIC AND CIVIL APPLICATIONS SUCH AS THE DISTRUBUTION OF WATER IN COMBINATION WITH SMALL AND MEDIUM SIZED PRESSURE SETS, FOR TRANSFERRING LIQUIDS AND FOR THE IRRIGATION OF GARDENS AND ALLOTMENTS.
These pumps should be installed in a covered area, protected
against the weather.
PERFORMANCE
The various models in the CP series are designed to suit
a wide range of applications, with features including:
- steady performance even under varying conditions
- flat absorption curves at high delivery rates, preventing
motor overloading even during prolonged use;
- good suction capacities both at low and high delivery rates
Curve tolerance according to ISO 2548
STRUCTURAL CHARACTERISTICS
- Cast iron Pump Body, with UNI ISO 228/1
gas threaded suction and delivery ports
- Stainless Steel AISI 304 Backplate (cast iron for CP 190-200)
- Stainless Steel AISI 304 Impeller
- Stainless steel MOTOR SHAFT EN 10088-3 - 1.4104
- Motor: pumps are coupled directly to an asynchronous,
high efficiency PEDROLLO induction motor, which is quiet
running, closed and externally ventilated, with <IM B3>
structural shape, suitable for continuous duty. INSULATION
class F (B up to 0.75 kW)
A thermal cutout device (motor protector) is incorporated
in single phase motors
NOTE: Three phase motors require an adequate external motor protector
complying with current standards
- PROTECTION IP 44.
- CONSTRUCTION AND SAFETY STANDARDS
complies with EN 60 335 -1, CEI 61-150, EN60034-1, IEC
34-1, CEI 2-3
- REGISTERED MODEL
*Installations must comply to Water Bye-laws in the UK.
PERFORMANCE CURVE
PERFORMANCE DATA
PRODUCT DIMENSIONS
Buy the CP Centrifugal Pump Online >>
|
