Whirlpool Bath Pumps

Pump Express > Whirlpool Bath Pumps

For all Whirlpool Pump Enquiries please call
0845 130 2000

Pegasus AP45 Hi Flow Pump - 45 gpm Ref: K0/16/01
Pegasus AP45 0.75 Horsepower, 45 GPM High flow pump, Incorporating pneumatic switch. Used extensively on our Pegasus 6, 8 and 10 jet systems.
Price: £161.56 (Including VAT at 17.5%)

Ultrajet Pump - Reconditioned Ref: B/ULTRAJETPUMP
Very few left. These pumps are reconditioned, not new, and therefore carry only a 6 month guarantee.
Price: £158.63 (Including VAT at 17.5%)

Evolux Imperial 0.95 HP pump with Pneumatic switch Ref: AS/ESUPEV100
This 0.95hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.

If you have any doubt about the thread size of your connectors please go to our FAQ page and check.

Click here to determine if the pump you need is Imperial or Metric.
Price: £161.56 (Including VAT at 17.5%)

Evolux Imperial 0.95HP Switched Pump With Drain Ref: AS/ESUPEV100/1
This 0.95hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.

If you have any doubt about the thread size of your connectors please go to our FAQ page and check.

Please note that this pump is prefitted with a crain connection for 10mm OD Nylon tube.

Click here to determine if the pump you need is Imperial or Metric.
Price: £167.44 (Including VAT at 17.5%)

Evolux Imperial 1.2HP Switched Pump With Drain Ref: AS/ESUPEV150/1
This 1.2 HP pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.

If you have any doubt about the thread size of your connectors please go to our FAQ page and check.

This pump incorportates a 10mm OD drain fitting for Nylon Tube. This drain will normally connect to a special draining waste as supplied with Pegasus Whirlpool Baths.

Click here to determine if the pump you need is Imperial or Metric.
Price: £179.19 (Including VAT at 17.5%)

Evolux Imperial 1.5 HP Imperial Pump (unswitched) Ref: AS/ESUPEV200
This 1.5 Hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.

If you have any doubt about the thread size of your connectors please go to our FAQ page and check.

Click here to determine if the pump you need is Imperial or Metric.
Price: £218.55 (Including VAT at 17.5%)

0.75HP Pump 32mm Discharge 50mm Suction Ref: S/075HP/32-50/SW
Compact 0.75HP replacement pump suitable for whirlpool systems with metric fittings 32mm discharge to jets and 50mm connection from suction pipe. Pre-fitted with pneumatically operated airswitch. Conforms to all relevant European standards IP55, TUV, kEMA, CENELEC

Click here to determine if the pump you need is Imperial or Metric.
Price: £156.66 (Including VAT at 17.5%)

0.75HP pump 50mm discharge-50mm suction Ref: S/075HP/50-50/SW
Compact 0.75HP replacement pump suitable for whirlpool systems with metric fittings 50mm discharge to jets and 50mm connection from suction pipe. Pre-fitted with pneumatically operated airswitch. Conforms to all relevant European standards IP55, TUV, kEMA, CENELEC

Click here to determine if the pump you need is Imperial or Metric.
Price: £162.15 (Including VAT at 17.5%)

Telescopic Pump Stand Ref: 9

Price: £11.75 (Including VAT at 17.5%)

links
Special Offers - Borehole Water Pumps - Centrifugal Water Pumps - Drainage Pumps- Power Shower Water Pumps - Sewage Water Pumps - Water Supply Boosting- Bilge Pumps- Pond Pumps

Pump Express > Whirlpool Bath Pumps