Pedrollo CR Stainless Steel Multi-Stage Pump
NEW Technical Characteristics
- Completely renewed range
- New design
- New improved hydraulic characteristics
- Even more reliable
- Higher performances
- The quietest model in the centrifugal series
Installation and Use
The CR Pedrollo pumps
are suitable for use with clean water and liquids which are not chemically aggressive towards the materials from which the pump is made.
As a result of their quietness
, these pumps are widely used in domestic applications
such as the distribution of water in combination with small or medium sized pressure sets and for the irrigation of gardens and allotments etc.The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Pressure boosting the water supply to a house from a tank
Used in pairs to pressure boost the water supply in gravity fed systems
- Flow rate up to 130 l/min (7.8 m3/h)
- Head up to 67m
- Manometric suction lift up to 7m
- Liquid temperatures between -10°C and +40°C
- Ambient temperature up to+40°C
- Max working pressure 7 bar
Pump Body: Stainless Steel AISI 304
, complete with threaded ports in compliance with ISO 228/1
Body Back Plate: Stainless Steel AISI 304
Impellers: Noryl FE1520PW
Motor Shaft: Stainless Steel EN 10088-3 - 1.4104Ports - Inlet & Outlet:
1" BSP Female Dimensions - All CR Models except the below:
H182 x W182 x L361mmDimensions - 5CR80:
H202 x W182 x L411mmDimensions - 4CR100:
H202 x W182 x L386mm
We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. The pump cannot be allowed to get wet or to freeze.
Other Products you may need
If you would like the pump to operate by switching it on and off then you will need to wire it to a fused spur.
If you would like the pump to operate automatically when a tap is opened, or a trigger on a hose is pressed then you will need a pressure controller. We recommend either the BRIO TANK
or the PRESFLO
or PRESFLO MULTI
. When attached to the outlet of the hose, before the first draw off of water the pressure controller will automatically start and stop the pump. These also protect the pump from dry running and from current overload.
If you would like the pump to operate to re-fill a tank, then a float switch could be used. Please call or email us if you would like any advice on what to use, or need the fittings to attach everything together.
Shipping & Delivery Information - Stock Items
For stock items, orders received before 2pm Monday to Thursday and 12pm on Friday are generally despatched the same day for next working day delivery. However, we cannot guarantee next day delivery on the service which we use for general sales. If you must have your goods next day please contact us by phone for details. We cannot accept responsibility for any delays caused by non-delivery of orders by our carrier agents.
Orders are normally shipped by Interlink Express. For credit card orders where an alternative delivery address is specified, a letter may be sent out to the invoice address for confirmation before the items are dispatched. These steps are made to protect your card from fraudulent misuse and may delay your order. If you wish to have your items sent to an alternate delivery address and require a Next Day Delivery service, we would recommend that you call us and pay via bank transfer. A signature is always required for the goods.
If your item is not in stock or if there is a problem with supply, where possible we will try to offer you an alternative product only if we feel it is a suitable replacement. You are under no obligation to accept this alternative. If we are unable to deliver the goods within 30 days you will be given the choice of cancelling the order completely and receiving a full refund of any monies paid.
All orders over £100 delivered to Mainland UK are available with FREE express delivery.
If you intend on shipping this item outside Mainland UK, or if you need any other shipping information please refer to our main Shipping & Handling Information page. Click here for full Shipping & Handling Information