|
 |
 | 3CR Stainless Steel Pumps with Brio and 2 lt potable expansion vessel. Ref: 3CR with Brio Pump Installation Instructions
Technical Specifications of Pump
Supplied complete with fully automatic pump controller and 2 lt potable expansion vessel, suitable for all whole house boosting water supply applications including negative head. These pumps are specifically designed for domestic use, having very efficient low power consumption motors and are extremely quiet in operation. Suitable for replacing Aquapower and Superpro pumps.
The Brio 2000M features:Adjustable start pressurePump protection from dry runningPressure guageSuitable for showers and other hot water applications (max 65°c). NOT SUITABLE FOR INSTALLING AFTER THE SHOWER VALVE - USE 3CRm80 WITH FS150 FLOW SWITCH INSTEAD SPECIAL OFFER ON TWIN PUMPS 15% OFF USUAL PRICE OF £660 INC VAT Price: £330.00 (Including VAT at 15%)
|
|
 |
 | 4CR Stainless Steel Pumps with Brio and 2lt potable expansion vessel. Ref: 4CR with Brio Pump Installation Instructions
Technical Specifications
Supplied complete with fully automatic pump controller and 2 lt potable expansion vessel, suitable for all whole house boosting water supply applications including negative head. These pumps are specifically designed for domestic use, having very efficient low power consumption motors and are extremely quiet in operation.Suitable for replacing Aquapower and Superpro pumps.
The Brio 2000M features:Adjustable start pressurePump protection from dry runningPressure guageSuitable for showers and other hot water applications (max 65°c). NOT SUITABLE FOR INSTALLING AFTER THE SHOWER VALVE - USE 3CRm80 WITH FS150 FLOW SWITCH INSTEAD SPECIAL OFFER Price: £341.00 (Including VAT at 15%)
|
|
 |
|
 |
 | PQAm60 single phase side suction water pump with Brio + Vessel Ref: PQAm60-Brio+vessel Technical information
Supplied complete with fully automatic pump controller and 2 litre potable expansion vessel suitable for all whole house boosting water supply applications including negative head.
The Brio 2000M features:Adjustable start pressurePump protection from dry runningPressure guageSuitable for showers and other hot water applications (max 65°c) Brio Dimensions Length = 195mm to end of thread Depth = 110mm Width = 110mm
SPECIAL OFFER
Price: £270.00 (Including VAT at 15%)
|
|
 |
For top performance and control combine the stainless steel three phase 3CR80 pump with the NEW Sirio ENERGY SAVING variable speed pump controller. Sirio is an electronic device based on INVERTER TECHNOLOGY that maintains constant system pressure by regulating the starting and speed of the pump.
SIRIO FEATURES Adjustable pressure set-point (Pmax), i.e. pressure value which will be held constant subject to the capability of the pump.Adjustable start pressure (Pmin).Protection from dry running in case of water supply failure.Automatic reset following shutdown caused by dry running, The restart parameters can also be adjusted.Leak detection function: Small system leaks are indicated on the display panel without interfering with system operation, large leaks can cause frequent pump starts and in this case the Sirio shuts down the pump to prevent damage. This function can be disabled.Alphanumeric backlit display with real time indication of the system pressure and of the pump motor speed.Customizable menu in 5 different languages.LED Indicators: green : network voltage red: alarm/leakage/dry running yellow: pump onRemote connection for the remote supervision of the systeReversal of phase automatic and adjustable by the displayFor correct installation and operation of the Sirio a 2 litre potable pressure vessel is required which is included in the price below Technical Info for Sirio and 3CR |
 |