Pedrollo CK Self-Priming Liquid Ring Pump 110v

Description

Pedrollo CK Self-Priming Liquid Ring Pump – 110v

INSTALLATION & USE

The Pedrollo Self Priming CK pumps are suitable for use with diesel.

As a specific result of the pumps operating principle, they are suitable for use in all situations where a compact self-priming pump is required or where the fluid supply is limited, irregular, or contains air.

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Cast Iron, complete with threaded ports in compliance with ISO 228/1
Motor Bracket: Aluminium with brass insert (patented), reduces the risk of impeller seizure
Impeller: Brass, star type with radial vanes
Motor Shaft: Stainless steel EN 10088-3 – 1.4104
Power Supply: 110V (110/1/50) 
Ports CK50 & CK50 BP – Inlet & Outlet: 3/4″ BSP Female
Ports CK80 & CK90 – Inlet & Outlet: 1″ BSP Female

PERFORMANCE RANGE

Flow rate up to 50 l/min (3 m³/h)
Head up to 48m

APPLICATION LIMITS

– Manometric suction lift up to 9 m (HS)
– Liquid temperature between -10 °C and 90 °C
– Temperature of diesel up to 55°C
– Ambient temperature up to 40 °C
– Max. working pressure: 6 bar
– Continuous service S1

Additional information

Performance Data

Downloads

CK Datasheet