Pedrollo PLURIJET Self-Priming Multi-Stage Pump – High Flow

Description

Pedrollo PLURIJET 90X-130X-200X Self-Priming Multi-Stage Pump – High Flow

INSTALLATION & USE

The Pedrollo PLURIJET pumps are suitable for use with clean water even when air is present and with liquids that are not chemically aggressive towards the materials from which the pump is made.
As a result of their quietness, reliability, and low energy consumption they are recommended for use in domestic and civil applications such as the pressurisation and distribution of water in combination with pressure sets, and in rainwater recovery and irrigation systems, etc.

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

CONSTRUCTION

Model: Pedrollo Plurijet 90x, 130x, 200x
Pump Body: Cast Iron and Stainless Steel AISI 304, complete with threaded ports in compliance with ISO 228/1
Body Back Plate: Cast Iron
Impellers: Noryl FE1520PW
Motor Shaft: Stainless steel EN 10088-3 – 1.4104
Power Supply: 230V Single Phase (230/1/50) or 400V Three Phase (400/3/50)
Ports – Inlet: 1 1/4″ BSP Female
Ports – Outlet: 1″ BSP Female

PERFORMANCE RANGE

Flow rate up to  200l/min (12 m³/h)
Head up to 97m

APPLICATION LIMITS

– Manometric suction lift up to 9m (HS)
– Liquid temperatures between -10°C and 40°C
– Ambient temperature up to 40°C
– Max working pressure: 10  bar
– Continuous Service S1
 

Additional information

Weight	19.4 kg
Dimensions	Length: 549 mm Width: 185 mm Height: 228 mm
Model	PLURIJET 5/90, PLURIJET 6/90, PLURIJET 3/130, PLURIJET 4/130, PLURIJET 3/200, PLURIJET 5/200, PLURIJET 6/200
Motor Type	Single Phase, Three Phase

Performance Data

Downloads

PLURIJET 90-200 Datasheet