Pedrollo JCR1 Stainless Steel Self-Priming JET Pumps 110v

Description

Pedrollo JCR1 Stainless Steel Self-Priming JET Pumps – 110v

INSTALLATION & USE

The Pedrollo JCR Stainless Steel Self Priming pumps are designed to pump water even in cases where the air is present. Because of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of gardens and orchards, etc.

Common applications include;

Irrigating a garden or pressurising a house from a shallow well
Irrigating a garden or pressurising a house from a stream
Irrigating a garden or pressurising a house from an underground rainwater harvesting tank

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Stainless Steel AISI 304, complete with threaded ports in compliance with ISO 228/1
Body Back Plate: Stainless Steel AISI 304
Nozzle Assembly: Noryl FE1520PW
Impeller: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Power Supply: 110V (110/1/50)
Ports – Inlet & Outlet: 1″

PERFORMANCE RANGE

Flow rate up to  60l/min (3.6 m³/h)
Head up to 48m

APPLICATION LIMITS

– Manometric suction lift up to 9m (HS)
– Liquid temperatures between -10°C and 40°C
– Ambient temperature up to 40°C
– Max working pressure: 6  bar
 

Additional information

Performance Data

Downloads

JCR Datasheet