Oil and Diesel Transfer Pumps

Advanced

Pump Express > Oil and Diesel Transfer

Vertix 3" Centrifugal Cast Iron Pump Ref: VSD300/3
Technical Specifications

Limited stock available of these single impeller centrifugal cast iron pumps with 3" threaded openings mainly used in agriculture and other applications requiring high level delivery. Suitable for diesel transfer.

Cast Iron pump casing with threaded openings.
Cast Iron motor bracket.
Cast Iron impeller.
Ceramic - Graphite mechanical seal.
AISI 303 steel motor shaft.
World leading brand ball bearings.
Liquid temperature up to 90°C
Max operating pressure 6 bar.

2 pole electric induction motor for continuous use.
Insulation Class F.
IP 44 protection level.
Price: £532.00 (Including VAT at 15%)

Single or Three Phase?

Marco UP3/OIL Ref: UP3/OIL
ELECTRIC GEAR PUMP particularly suitable for the transfer of lubricating oils or viscous liquids, complete with two brass connections for 14mm inner tube and one additional quick-fit connection for 8mm external tubing. The pump can be used for extracting lubricating oil out of oil sumps of engines through the special tube kit (OK1). Brass body with bronze gears, stainless steel shaft and rubber lip seal.

Low voltage 12v
Flow Rates
20 l/h Ø 6mm
60 l/h Ø 8mm
330 l/h Ø 14mm
Price: £108.00 (Including VAT at 15%)

OK1 Tube Kit - Select if required £9.40 inc VAT

Marco UP3/AC OIL/DIESEL Ref: UP3/AC
Self-priming electric gear pump for transfer of diesel fuel, lubricating oils and rape oil.
Brass body, bronze gears and stainless steel AISI 420 shaft.
3/8" BSP ports with Ø14 mm I.D. brass hose connections. Complete with in-line filter.
Voltage available 220V single-phase.
Particularly suitable for draining engine sumps, oil transfer applications between tanks, containers and boilers, refuelling of tractors, vehicles and earth-moving machines.

Pressure 3 Bar
Flow Rate 10 l/min
Dimensions 235x117x180mm
Price: £173.21 (Including VAT at 15%)

Marco UP6 Gear Pump Ref: UP6
SELF-PRIMING ELECTRIC PUMP with bronze gears for transfer of various liquids complete with inline filter. Brass body with stainless steel shaft.
Ports: 1/2" BSP with brass connection for Ø 16 mm inner tubing.
Main applications: transfer of diesel fuel, water, antifreeze etc.

Low Voltage 12v
Pressure 2 Bar
Flow Rate 26 l/min
Dimensions 199x174x108mm
Price: £157.64 (Including VAT at 15%)

Marco UP9 Gear Pump Ref: UP9
SELF-PRIMING ELECTRIC PUMP with bronze gears for heavy duty operations whenever a prolonged service or a pressure of maximum 4 bar is required, complete with in-line filter.
Brass body with stainless steel shaft. Ports: 3/8" BSP with brass connection for Ø 14 mm inner tubing.
Main applications: transfer of diesel fuel, water, antifreeze, etc.

Low Voltage 12v
Pressure 4 Bar
Flow Rate 12 l/min
Dimensions 187x166x103mm
Price: £165.43 (Including VAT at 15%)

Marco UPX-CAC Chemical Gear Pump Ref: UPX-CAC
Self-priming electric gear pump particularly suitable for use in chemical applications where it is essential that all parts in contact with the liquid are of non-corrosive materials.
Resistant to most acid and alkaline solutions.
Body and shaft made from stainless steel AISI 316, PTFE gears, fluoro elastomer seal. 3/8" BSP ports with 14mm I.D. stainless steel hose connections and inline filter.
The motor specified is 0,12 KW 0,91A. Not suitable for the transfer of petrol (gasoline).

220v
Pressure 6 Bar
Flow Rate 10 l/min
Dimensions 279x166x162mm

Price: £264.67 (Including VAT at 15%)

BE-M20 Self Priming Pump Ref: BE-M20
Technical Details
0.37 kW
1800 l/h

Price: £92.00 (Including VAT at 15%)

BE-M30 Self Priming Pump Ref: BE-M30
Technical Details
0.75kW
5,000l/h
Self-priming lateral liquid ring pump for clean water, wine, milk, salty water and diesel

Price: £172.50 (Including VAT at 15%)

Hornet W 50 11 Pump, Meter, Gun and Hose Kit Ref: W5011
Technical Information
Medium: Diesel, fuel oil EL/L, anti-freeze protection (undiluted), RME and fuel oil additive

· capacity approx. 52 l/min.
· with analog meter Z300

· power supply 230 V ~
· self priming with integrated anti-siphon safety feature
· drum thread R 2”
· incl. suction hose with filter for suction depth of 1600 mm
· discharge hose 4,0 m
· DN 19 x 4, with authorized automatic nozzle A2010
with hose swivel

Image for illustration purposes only

Call for current price.

Hornet W 40 Ref: W40
Technical Information
HORNET W 40
Medium: Diesel, fuel oil EL/L, anti-freeze protection (undiluted), RME (special types)

· capacity ca. 40 l / min.
· power supply 230 V ~
· priming level with integrated anti-siphon safety feature
· drum thread M 64 x 4 and G 2”
· incl. suction hose with filter for suction depth of 1600 mm
· discharge hose 4,0 m
· DN 19 x 4,HORN 40 x, anti-knick spring
· standard nozzle ZP 19

Call for current price.

Hornet G 40 12v Ref: G40
Technical Information
HORNET W 40
Medium: Diesel, fuel oil EL/L, anti-freeze protection (undiluted), RME (special types)

· capacity ca. 30 l / min.
· power supply 12 V ~
· priming level with integrated anti-siphon safety feature
· drum thread M 64 x 4 and G 2”
· incl. suction hose with filter for suction depth of 1600 mm
· discharge hose 4,0 m
· DN 19 x 4,HORN 40 x, anti-knick spring
· standard nozzle ZP 19

Call for current price.