|
PV Peripheral Pump PVm55 General Product Description
PERFORMANCE RANGE
Flow rate up to 10 l/min (0.6 m³/hr)
Dynamic head up to 42m
PUMP INSTALLATION AND APPLICATIONS
These pumps are suitable for handling clean water not containing
abrasive particles, and fluids which are not chemically aggressive
to the pump components.
THE DESIGN OF THIS PARTICULARLY COMPACT BRASS PUMP OFFERS AN EFFECTIVE GUARANTEE AGAINST THE FORMATION OF RUST AND OXIDATION; AS A RESULT THEY ARE RECOMMENDED FOR USE IN INDUSTRIAL APPLICATIONS SUCH AS COOLING AND CONDITIONING.
These pumps should be installed in a covered area, protected
against the weather.
OPERATING LIMITS
- Suction lift up to 8m
- Fluid temperature up to + 90°C
- Maximum ambient temperature + 40°C
STRUCTURAL CHARACTERISTICS
- Brass Pump Body, with UNI ISO 228/1
gas threaded suction and delivery ports
- Aluminum motor bracket with brass insert
(patented), reducing difficulties when starting the
pump after long periods without use
- Brass Impeller, with radial peripheral blades,
floating on the shaft
- AISI 316 stainless steel MOTOR SHAFT (AISI 416
up to 0.75 kW)
- Cermaic and Graphite Mechanical Seal
- Motor: pumps are coupled directly to an asynchronous,
high efficiency PEDROLLO induction motor, which is quiet
running, closed and externally ventilated, with <IM B3>
structural shape, suitable for continuous duty. INSULATION class F
A thermal cutout device (motor protector) is incorporated
in single phase motors
Three phase motors require an adequate external motor protector
complying with current standards
- PROTECTION IP 44
- REGISTERED MODEL
- 1 Year Guarantee subjet to our general terms of sale
*Installations must comply to Water Bye-laws in the UK.
PERFORMANCE CURVE
PERFORMANCE DATA
PRODUCT DIMENSIONS
Buy the PV Peripheral Pump Online >>
|
